-
Hi,
**Overview:**
So I've got domoticz on a Raspberry PI using a RF hat to sniff the packets from an evohome system. I have an eventscript that pushes Temps and Relay values to emoncms so I can ma…
-
Hi,
I bought a NanoCUL a few months back to be able to control my Evohome from Domoticz.
Have been able to discover all valve, but I'm not able to set the controller mode (normal, economy, off, …
-
Hi. Amazing work you have done.
Do you know if the _flags_n have any useful purpose. I only ever see a value of FF?
Thanks
-
Hello,
I'm tring to get schedule with the following payload:
`{"command": "get_schedule", "ctl_id": "01:183483", "zone_idx": "00"}`
but I get the following error:
`2022-04-16T08:30:57.95188364…
-
Hi,
Question: Im sending the data to MQTT which seems to be working fine.
But if im looking into the data i can see heat demands coming by, but how to interpert this data?
i see for example:
H…
-
### The problem
In the evohome integration, climate elements always have a status of "heat". The status shouls be off if the radiator is not requesting heat and on if it is.
However, this value se…
-
[rf_interface_ic3.txt](https://github.com/zxdavb/ramses_rf/files/9994700/rf_interface_ic3.txt)
Hi,
according to the Intergas Diagnostic Software (IDS) the Intergas HRE / Xtreme HVAC systems are …
-
### The problem
When using the Evohome integration (evohomeasync) an 'HTTP 403 forbidden' error is thrown in the log with the response code: "LatestEulaNotAccepted" and followed with a warning that i…
-
- 1) as you can check in the attached file the zone "00" is reported in "Schema[01:095571 (evohome)]" with sensor "null" instead of with "01:095571" because it has been assigned as the current tempera…
-
I'm currently running the latest release at the time of this writing that is 0.20.22g with the configuration from the 0.19.2. My configuration indeed is the one with `evohome_cc`.
I got updates int…