-
My printer is equipped with a belay. I followed the wiki for its configuration and the correct information is displayed by the mmu_sensor command
(triggered when I compress the belay by hand)
co…
-
Found some issues on the A1 mini code and patched them as good as I could. Runs smooth for me now:
-flushing takes place on wrong side of the bed --> added the right x coordinate
-extruder doesn't…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
V2.2.0 RC Release
### Operating System (OS)
Windows
### OS Version
Windows
###…
-
This is a fresh install, and the gcode files just contain
```
;Generated from just_in_case.tmp.1719745022467.stl (hash: c984a5cf3c8d6d334d1c4b62464525414c446935)
; BEGIN DISPLAYLAYERPROGRESS SETTIN…
-
"Warning: Park_pos (58.0mm) cannot be greater than 'toolhead_extruder_to_nozzle' distance of 41.0mm! Assumming fully unloaded from extruder"
Can someone tell me what Park_Pos is going on and where …
-
Use case - standard, purge block based filament changes, no blobifier or cutter.
Setting variable_park_toolchange : -1,-1, 0, 0, 2 to prevent HH from moving/parking on toolchange so it remai…
-
Every time a start a print from mainsail or orcaslicer, I get
error: typ = WebRequestError, code = 10011703, message = unknown filament in extruder
First I thought there was some stuck filamen…
sebb3 updated
1 month ago
-
### Description of the bug
If I go to Printers -> Extruder # -> Extruder Color, and click "Reset to Filament Color" for all of the extruders, then the generated Gcode contains a blank `extruder_colou…
-
can not get the extruder to work. if i plug the extruder motor in to one of the axis’s motor it moves . so motor is good. i have the extruder plugged into motor 5 on the board. i have checked wiring. …
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.2.0-rc
### Operating System (OS)
Windows
### OS Version
11
### Additional sy…