-
I hope you keep maintaining this! It would be good to add support for the Firmata features from protocol version 2.1 (supposed to already be supported in PyFirmata) and eventualy 2.4 and 2.5.
For 2.…
-
Recently I've finished documentation of standard Firmata protocol (for myself mostly).
Take a look at https://github.com/martin-eden/firmata_protocol/blob/main/protocol.md
One style, railroad di…
-
Because Firmata and ConfigurableFirmata diverged a few years ago, they have different version numbers. However as far as the protocol is concerned they should be equal (in that both versions of Firmat…
-
It would be nice to have a Firmata host side implementation for Linux. There are plenty of SBCs running Linux that could benefit from it. Few immediate ones that come to mind:
[Raspberry Pi](https:…
-
[`pyFirmata`](https://pypi.org/project/pyFirmata/) gives an interface to the [Firmata](http://firmata.org/) protocol for talking to Arduinos.
This could be a good way to make `labby` capable of tal…
-
Hello,
I've been trying to get a Particle Photon (particle.io) to work with Snap4Arduino. I was able to do so using [Firmata/Spark](https://github.com/firmata/spark/), but I've noticed that your li…
-
When I run the command "node ." nothing happens. No error messages.
![image](https://github.com/firmata/firmata.js/assets/100669486/07f25d2b-02ca-4666-9a45-476df52f6a5c)
I installed the firmata …
-
I want to read A0 on my board, I'm not entirely sure how this works, and there's no example so was trying to write one. So far I have something like this:
```
firmata = firmata_new("/dev/ttyACM3");
f…
-
I bought this ESP8266 board from Amazon: https://www.amazon.com/HiLetgo-Internet-Development-Wireless-Micropython/dp/B010O1G1ES/ref=sr_1_1?ie=UTF8&qid=1517445512&sr=8-1&keywords=esp8266+wifi
I have…
-
Hi,
if I use this code on StandardFirmataPlus, the firmata works on the begin but then it stop when I send Firmata.digitalwrite from my client program.
Code into StandardFirmataPlus:
void …