-
Hello,
I think I'm a bit too dump, but I have problems with the alignment of my PCB for drilling. The camera probing works well, and I managed to do all the neccessary steps, even the checks necces…
-
pcb2gcode is an amazing tool! However, here's a feature request :)
R…
-
GRBL does not support M6 tool change command. However Candle processes G-code before sending it to machine. So it would be good to interpret M6 in incoming G-code as spindle stop, then up Z-axis to so…
-
I am trying to make a two sided PCB with Kicad and pcb2gcode. I have been using flatcam before, but the GUI based process is very slow so want to migrate to pcb2gcode. I have previously used it to mak…
-
Isolation routing does not appear to respect the overlap setting for the last path in the middle of two copper areas.
For example in the below image overlap is set to 49%, tool width 0.25 mm and th…
-
Hola, estoy usando ubuntu 20.04 y he instalado el java que viene por defecto en ubuntu 20.04 que es (openjdk version "11.0.15" 2022-04-19) ya que el de la página oficial da errores y no funciona el pr…
-
I'm a complete newbie, apologies in advance for being dumb.
I've just started tested my Tomtop mini cnc but everything I cut is tiny. I've used a number of source files so don't think the problem i…
-
I have generated some G code with [Flatcam](http://flatcam.org/) and as usual opened it with bCNC and it did not show the complete design.
At first I did not really notice it(even it was very obvious…
-
I would like to add support for opening gerber files, because flatcam does not really work with KiCad gerbers for me and i have to fix the g-code in bCNC anyway.
Opening excellon files might be opt…
-
https://pypi.org/project/setuptools-scm-git-archive/
Says `This plugin is obsolete. ``setuptools_scm >= 7.0.0`` supports Git archives by itself .`
setuptools_scm_git_archive is still needed as d…