-
Based on the price of the HackRF and transmitters, I was considering if the code could be ported to Arduino and use a FS1000A (https://www.amazon.com/HiLetgo-Transmitter-Receiver-Arduino-Raspberry/dp/…
-
In my project I used a programmable radio, the CC1101. It allows for using the Somfy required 433.42 MHz frequency without changing crystals. I achieved full range successful Somfy shade communication…
-
Hello,
I have tiny module FS1000A which is 433MHZ RF Receiver module, I'm currious whether is can play with it using rtl_433?
-
Do you use FS1000A with antena?
Can you tell please which antena did you connect? What was the range of TX?
-
Hello,
there seem to be different versions of the FS1000A transmitter available and the distributors do not differentiate between the different versions. But in the following pictures you can see t…
-
Hello,
I think you are using a DSLogic with DSView to analyse the signal.
I did the same but I just want to know how you decode the signal and display hexa value ?
Your code is working with my mode…
-
Hi,
Looking for a way to send a 330MHz signal, is there anything out there that goes on a ESP32 board? I'm seeing that FS1000A is supposed to have 315/330/433 chips but I'm only able to see the 315…
-
**Raspberry Pi 4 (2gb) with Home Assistant 0.112.4, Receiver : RXB6, transmitter FS1000A**
**ESP8266**
**ESPHome 1.14.5**
**remote_transmitter and remote_receiver : https://esphome.…
-
i just can't get it to work. I bought a 5-pack of transmitter and crystals, and have tried soldering it twice now. And nothing happens.
As suggested (by @Ezezi3l ) in another thread I got one of the…
-
Hi, I have several small projects running with Atmega328p and FS1000A / WL101 433MHz transmission : they detect a letter in box, the water level in tanks, etc....
Since now I used the OLED ssd1306 di…