-
Some sensors use multiple I2C devices. Example of that is SenseHat. Currently in order to swap I2C implementation with different one (i.e. Ft4222) it's a bit of a hassle: device need to take 6 I2C Dev…
-
Hi,
I'd like to prepare for contributing to this effort, by creating my own fork.
It looks like @ctrl-shift-esc has been officially designated as the project maintainer.
However, @mtikekar has ma…
-
Hi,
I want to use this library with FT4222, so I had to add FTDI4222=ON USBPLAT=ON.
What is command line please ?
I try _cmake .. -DFTDI4222=ON -DUSBPLAT=ON_ but it don't found library for FT4222…
GuzMp updated
7 years ago
-
Hi,
Actually, I use LoRa_SX1272 library (a library to use a LORA module) with my FTDI FT4222. So I had to modify LoRa_SX1272 in order to works with the libft4222.h and ftd2xx.h. And after I created…
GuzMp updated
7 years ago
-
Hi,
I try to test mraa-i2c.c with FT4222 with nothing in i2c bus but it fail. In my syslog :
Nov 18 13:20:10 teo-System-Product-Name libmraa[19513]: libmraa version v1.5.1 initialised by user 'ro…
GuzMp updated
7 years ago
-
Hi
I have a BeagleBone Green Wireless board with Debian installed.
Installing mraa with npm fails. Here is the error log.
I installed `libudev-dev` beforehand:
```
apt-get install libudev-d…
-
Title says it all, if you try to use both MRAA and some UPM driver with the FT4222, the second subplatform init will fail. So far only tested this with node but I assume it will happen in other langua…
-
The FT4222 sub-platform supports extra GPIO via i2c expanders. If an ISR is registered for one of these expander GPIOs it will disable ISRs for any existing expander ISRs.
-
At https://github.com/intel-iot-devkit/mraa/blob/master/src/gpio/gpio.c#L272 the FTDI GPIO interrupt handler is called, but setup for Java is called a few lines after this: https://github.com/intel-io…
-
After upgrading my edison to node 0.12.27, mraa@0.8.1 fails to npm install. I double checked that npm install works fine for mraa@0.8.0.