-
Hello.
First, thank you very much for all the work you do for this project!
I'm looking for a project that can be used as an electronic lead screw for the lathe with CNC capabilities, so the lathe c…
-
I have a HY 1.5K Spindle that works perfectly. I can start and stop the spindle from io sender without any problems. From time to time when i have to abort the program the spindle does not stop. I…
-
Hi
I order this https://www.waveshare.com/wiki/Pico-Eval-Board
so I can use it to learn programming the pico
Can I use this with the code you use to display the grbl info in the LCD in this projc…
-
Hi Terje, me again, lol. Give me a light, walk... I'm using a BTT TFT display developed for Marlin. I partially changed the firmware to communicate with grblHal and in grblHal I enabled the keypad as…
-
Hi Folks, I would like to know how to target the STM32F405RG6 or other MCU . Is there a guide to do this ? or is it assumed knowledge? I've no been able to find the details in the documentation.
…
-
This version will take advantage of RGB device(s) available via the latest version of the grblHAL driver API, and is heavily refactored for speed. E.g. blinking is only updated every 1ms and spindle a…
-
What is the reason for this?
![8db56a3b1d44eb893c41aa42a95ca4b](https://github.com/user-attachments/assets/f1039d94-4b26-463e-aca4-12a93e8b633e)
-
Hello. I have previously used the grblhal firmware on the esp32 device. I was able to write $help in terminal and it would respond with all the possible settings. For example $help limits would return…
-
It would be great if we could utilize Trinamic's feature set for some safety, namely:
* Different motor currents for different modes (`G0` or jogging should require much less than steel milling).
…
-
Good day
I came across your grblHAL_Backup for the MKS DLC32 after about a week of trying to get grblHAL on my board. Needless to say, the firmware works. So a big thank you for that.
I now ran …