-
Hi, thank you for the arm64 version. I am using your pre installed desktop [release v21](https://github.com/TheRemote/Ubuntu-Server-raspi4-unofficial/releases/tag/v21).
Everything is working so far b…
-
Hi!
I try to display some text on an oled display which is connected by a grove cable to my respeaker 4.
I use a raspi 4 with Raspberry OS (buster). i2c is activated in raspi-config.
Directly conne…
-
Hi,
I am trying to display my car's data on the Seeed Grove 1.12" v2 OLED display:
https://wiki.seeedstudio.com/Grove-OLED_Display_1.12inch/
My controller is an integrated CAN BUS board...which…
-
Hi,
I'm trying to run the examples of the library with the Seeedstudio OLED Display 1.12" but I only get glichy characters on the screen!
I'm using the following constructor:
U8X8_SSD1327_SEEE…
-
I am looking to modify the library to build a function so i can enable each pixel individual.
Any help??
-
I have this round 1.2" inch oled EA W128128-XRLW; [https://www.mouser.fi/ProductDetail/ELECTRONIC-ASSEMBLY/EA-W128128-XRLW?qs=sGAEpiMZZMshRHSPqbouvJWDKQb1KqZ10IgVqkv8Swn4rpO3VjZ11w%3d%3d](url)
I wi…
-
Grove OLED Display does not work, neither old model nor new one.
Or documentation should be corrected, or firmware fixed.
![image](https://user-images.githubusercontent.com/31170413/72178382-0e…
-
-
I am trying to run the loadFromSD demo sketch with an ESP8266 connected to as ST7920 LCD and an Sd card.
I have the display on pins D5 (CLK), D7 (MOSI) and D10 (CS) with the following constructor:
…
-
Seb
I have had problems getting the OLED display in the Grove Beginner Kit to work.
In the end I had to change the constructor line from
U8X8_SSD1306_128X64_ALT0_HW_I2C u8x8(/* reset=*/ U8X8_…