-
I open your basic sample,
When i send regulat AT command, it works.
When i send http command, i get gibrish in the response.
The code i sent in console:
AT+CHTTPCREATE=http://www.iforce2d.net/…
roysG updated
3 years ago
-
```
in case datacard crashed and the ttyUSB is not free anymore we might have this
case:
[ 2091.571064] option 1-5.4:1.0: GSM modem (1-port) converter detected
[ 2091.571303] usb 1-5.4: GSM modem (1-…
-
### Board
esp32s3
### Device Description
dev kitc1
### Arduino-ESP32 Version
latest
### Bytebeam Arduino SDK Version
latest
### IDE Name
arduino IDE
### Operating System
…
-
I am getting following errors I think in onIncomingUSSD or onNewMessage
**Error 1**
----- Unhandled Rejection at -----
Promise {
TypeError: Cannot read properties of undefined (reading 'index…
-
I'm trying to use MQTT on Sim 7000C with NB-IoT Network
I'm using this example code for trying to use MQTT with NB-IoT
Network configured but not connected with broker.
Modem: SIM7000C R1351
…
-
Hello! I'm using the wonderful library arduinoWebSockets on ESP32. I want to use a GSM modem to connect my client running on ESP32 with a remote server via Websocket. The SIM800 modem has its own TCP …
-
I have a SIM800L TTGO TCall. I have chosen Thingsboard IoT platform for a project. The example just doesn't work for me :(
I have tested Blynk GSM example and it works fine. I have tested thingsboar…
-
I have ppp using `/dev/ttyS0`. Also trying to use `/dev/ttyUSB2` for receiving SMS with smstools.
When ppp0 connects I get this in `dmesg` and `/dev/ttyUSB2` goes away:
```
[ 40.330141] usb 1-1.3…
-
### Describe the bug
I think the dwc2 driver has a timing problem with the SIMCOM_SIM7600G-H modem.
I see in the log the message "dwc2_hc_chhltd_intr_dma" and the modem can not be initialized.
…
-
Hello, I am observing repeated failures trying to send a post request via SSLClient using my SIMCOM7600G modem with TinyGSM.
The most common and consistent error message:
```
[318168][E][ssl__cli…