-
I tried to use the Softwarewire library with the normal wire library in the same scetch to comunicate with a master(Mindstorms EV3) and a slave(I2C sensor). Each function for itself works but when I c…
-
Dear Kriswiner,
Do you have any example with ESP32 + MPU9250 without MS5637 ?
My mission is do a angle level where I need to get ate least roll and pitch values, from one machine, save, and aft…
-
Hi there,
I'm using esp-wroom32 and i just noticed that when we turn the power ON (from usb or from a battery) calibration coef are 2x higher than what they should be. measurment are also 2 times hi…
-
Hi, I am a beginner. I try to use microbit javascript to get GY-521 readings. I find microbit_GY521.initialise() is not working and serial.writeNumber(microbit_GY521.readGyroX()); given 0 reading.
…
-
Hi,
I'm new at using the MPU-6050, but from what I've read online, the ypr values should stabilise after a few seconds. The pitch and roll do stabilise, more or less, but the yaw value is not stabilis…
-
Hello, is it possible to add a fuction that flips the TM1637-based 7-segment 4-digit display, so the numbers (time) are showing as rotated 180 degrees? I'm building a timer that can be used/mounted in…
-
[This is not an "issue". It's just a comment really, and I couldn't think of a better place to put it.]
You've probably already seen these before, but just in case you haven't.
https://www.ali…
-
@jonmagic is an english version of the robot hardware assembly anywhere? I took a quick look but didn't see it.
1. we should also make a parts list. if you share yours I'll probably order a bunch of…
-
Hello there, I have a problem with **self - test** values that show more than 40% difference from the factory values. In other examples, I saw that output should be as close to 0 as possible. Could so…
-
MPU9250_MS5637_AHRS_t3:312: error: 'I2C_MASTER' was not declared in this scope
Wire.begin(I2C_MASTER, 0x00, I2C_PINS_16_17, I2C_PULLUP_EXT, I2C_RATE_400);
^
MPU9250_MS5637_AH…