-
The documentation on the site does a good job of covering GNSS-SDR compatibility with different architectures and the build process. However, there is almost nothing about performance. The only mentio…
-
https://github.com/leeboby/raspberry-pi-os-images/blob/main/OrangePi_Zero2w_H618_RaspiOS_%E4%BD%BF%E7%94%A8%E6%89%8B%E5%86%8C_v1.0.pdf
thanks
-
Does it work with the Orange Pi 2w?
It has a UWE5622 and Allwinner H618.
I am using their Debian Bookworm 6.15 i think.
I have the 4gb version
If you need more information, I can give it
-
**Device Information | 设备信息**
- SOC: [H618]
- Model [Allwinner]
**Armbian Version | 系统版本**
- Kernel Version: [e.g. 5.15.100]
- Release: [e.g. jammy/bullseye]
**Describe the bug | 问题描述**
…
-
as I mentioned in https://github.com/aluminum-ice/pwnagotchi/issues/122 basically it would be a good step up to have the orange pi zero 2W supported; it has a built in 2.4/5GHz antenna, and two usb C…
-
`
--- MiniMyth2 to eMMC installer v2.0 (c)Piotr Oniszczuk ---
/usr/local/bin/install-on-emmc: line 98: warning: command substitution: ignored null byte in input
Ooo...you are running tanix,tx6sal…
-
It looks like the Orange Pi zero 3 utilizes i2c3 for the i2c bus. But the default raspi-config seems to enable support for only i2c1 and i2c2 (the latter for the hdmi). boot config dtoverlay params i…
-
I have a TVBox based Vontar H618, I successfully installed it with version **MiniArch-20230718-6.4.4-board-h618.vontar_h618-SD-Image.img**, but with current version (**MiniArch-20231112-6.6.8-board-h6…
-
I like this board, but unfortunately the example of using GPIO does not work in build 20240228. Perhaps it worked in previous builds. I can’t control the LED from the echo and the C code doesn’t work …
-
Mainline U-Boot does not support the 1.5 GB RAM variant, and the Orange Pi bootloader has this issue. For more details: #6594
- [x] Test own build of Orange Pi bootloader with `CONFIG_DRAM_SUN50I_H…