-
**Describe the bug**
In recent software revision (branch: master, commit: 1c275103948ca33580f621c7b3fc3266290de2d6) hw antenna tune going just hairwire and gives weird results:
```
[usb] pm3 --> hw…
-
**Describe the bug**
When the bluetooth module is enabled the proxmark does not behave as expected.
**To Reproduce**
Steps to reproduce the behavior:
1. Enable `PLATFORM_EXTRAS=BTADDON` in `Make…
aczid updated
4 years ago
-
-
**Describe the bug**
The client help says that the default password is 4D494B52, but this doesn't seem to work. However if you manually specify this as the password, it works.
**To Reproduce**
St…
-
wrong freq for me! it stop working (keyfob) on 125khz
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz FpgaSendCommand(FPGA_CMD_SET_DIVISOR, LF_DIVISOR_134);
The update is a huge improvement.…
-
Hello!
I have **Proxmark3 Easy**.
Information about the device with official firmware:
```
administrator@adminpc:~/proxmark3_official/client$ ./proxmark3 /dev/ttyACM0
Prox/RFID mark3 RFID instr…
-
**Describe the bug**
Commit d956e8c2a30d4f74f270da1d84b5ff71d4246757 was the last commit that lf t5 det works properly. After the hitag changes are added, lf t5 det always fail with "Could not detect…
-
Adding new hitag2 attacts implemented in RFIDLER by Kev Sheldrake.
-
`lf hitag write 1 00000000`
Expected write to page 1, actually writes to page 2.
Issue is in the `blocknr` incremention behavior in password auth, can be patched but I will try to refactor the who…
ViRb3 updated
4 years ago
-
**Describe the bug**
Cannot compile even with fresh repo clone
**To Reproduce**
Steps to reproduce the behavior:
1. apt-get install gcc-arm-none-eabi git build-essential libreadline5 libreadline…