-
I want to flash my Sonoff ZigBee Stick with Ptvo. I take the sonoff_3_usb_dongle_plus file and adjust it using the firmware configuration program. I set the signal strength to 20.
z2m found the dev…
-
Hi all,
i have 2 out of 10 shelly 1 plus at my home which are not correctly upgrading. I dont know if they both were in the same double-package and have some common differences with the other ones …
-
I bought a brand new de 10 nano direct from Terasic in August. I have found the uboot image with the latest release (20220413) to boot unreliably, approximately 10% success rate.
However if I build…
-
I think this powerful test suite would be made even better with a more straightforward integration with Mbed's existing greentea testing system.
While this test suite was originally developed for i…
-
Hi,
I discovered that there is a prebuilt kernel located in board/batocera/allwinner/h700/rg35xx-plus. It appears that this cfw created for the rg35xxh uses this uImage instead of building it from …
-
Hi!
First of all thank you for this very useful tool; I've found myself using it a couple different times in the past few years.
I'm currently working on a small project that generates QR codes…
-
I'm on Arch. I can use the device if I `sudo`. I also tried installing udev rules as follows (provided by sigrok package). However to no effect. Is there anything I need to include here?
```
##
## …
-
Hi All,
Im working on 80211s mesh using ralink usb dongle + openwrt + compat-wireless-2016-01-10.
i have created mesh access points ( bridging AP + MP interfaces).
with 5 to 6 boards(MAP) im …
-
I wanted to set up limiting the charge level of the battery of my chromebook, so that it may remain useful for a longer time, but it seems currently it may not be possible.
So far I have found out …
-
Hello. I purchased NETGEAR's A6210-100JPS to use the mt7612u in Japan (because it passed the technical standards and was sold in Japan).
However, when I investigated, I found out that
・txpower has l…