-
Do you take orders for prebuilt boards? I see that they were available at some point. If so how where can I get one vs building myself if possible.
-
Build done with mingw64 latest version with commit https://github.com/glscopeclient/scopehal-apps/commit/d611cbae57684b0505b2ca846d444b94b9ad2786
- For information previous build (from 2 days ago) …
-
With nfc-lab v2.1.0 (my own build see https://github.com/josevcm/nfc-laboratory/issues/3) It seems when clicking on the Filter there is no effect (and I do not see where to enter the filter and what a…
-
Hello guys, I don't know if this is the correct place for this, but recently bought HydraBus and have a lot of problems flashing firmware. The board is not recognized by the host either in normal mode…
-
I have just tried the latest official release of nfc-lab v2.1.0 from https://github.com/josevcm/nfc-laboratory/releases/download/2.1.0/nfc-lab-2.1.0-x86_64.exe and it does not start correctly.
The in…
-
Everytime HydraBus enter the BBIO PIN mode, the gpio will be re initialized.
https://github.com/hydrabus/hydrafw/blob/32d53fccb5352b246aea4d71cf46990a83b7bc16/src/hydrabus/hydrabus_bbio_pin.c#L50…
-
I have encountered multiple compilation issues with actual master (tested with commit 32db3cb410f175471e9078a9d53ae5badae5f426) when using QtCreator with MinGW64 (tested with QtCreator 4.10.1 & Qt 5.1…
-
I always fail to get HydraFW newest version up and running with OpenOCD:
% openocd -f hydrabus_openocd.cfg -d
...
Debug: 71 12 semihosting_common.c:99 semihosting_common_init():
Debug: 72 11…
-
During the short time I have had time to play with a chameleon mini, I noticed an sense of missing utils.
Its like PM3, most stuff is there but you need to know where they are. Not super clear b…
-
Hi,
I'd like to use hydranfc to read the raw signal using the direct mode 0 of the TRF7970A chip. I want to obtain a raw signal such as the two signals (rx and tx) at page 46 of the chip's manual: ht…