-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…
-
```
Hi there,
currently Wire (through twi_init()) enables by default the internal pullups of
the uC.
As all 16MHz runs at 5V this means that with pullups enabled signals will have
a 5 volt on logi…