-
### The problem
**ESPHome firmware versione:** 2024.5.5
**Wake word engine location:** On device
When I say the wake word "hey jarvis", sometimes the ESP32-S3-BOX-3B goes into error by showing a …
-
Please add two I2S MEMS microphones (e.g. [Invensense ICS-43432](https://www.invensense.com/wp-content/uploads/2015/02/ICS-43432-data-sheet-v1.3.pdf) or [Knowles SPH0645LM4H-B](http://www.knowles.com…
renne updated
6 years ago
-
### Board
ESP32-WROOM-DA
### Device Description
Teyleten Robot INMP441 Omnidirectional Microphone Module MEMS High Precision Low Power I2S Interface for ESP32
### Hardware Configuration
no
### V…
-
The current configuration schema for ADF pipeline components is not intuitive and primarily focuses on the developer's perspective rather than the user's perspective.
I am planing the following cha…
-
Thank you for reporting an issue with **AlexaPi**.
Make sure you are running the latest version of **AlexaPi**, and look through [issues](https://github.com/alexa-pi/AlexaPi/issues?utf8=%E2%9C%93&q…
-
I think it would be amazing to have a broadcast funtion on the I2S interface. An automation to send the audio in the I2S mic to the media players. It would be PPT intercom.
-
### PROBLEM DESCRIPTION
Currently I2S Audio driver requires configuring I2S DOUT even if you only have a microphone connected, otherwise it crashes Tasmota. As it is not intuitive to users and wast…
-
[logs_esp32-s3-box-lite-d50078_run.txt](https://github.com/esphome/firmware/files/13854222/logs_esp32-s3-box-lite-d50078_run.txt)
Greetings,
I have 2 of the box-lite. Both of them will not acti…
-
### The problem
As the title states, since upgrading my ESPHome base add-on, I am unable to compile the file for my ESP32-S3-Box-3. I have several other ESPHome devices that upgraded just fine. The…
-
I am trying to get your standard code working with a ICS43434 microphone connected as follows:
#define I2S_WS 22
#define I2S_SCK 23
#define I2S_SD 5
I can se…