-
I saw it was asked to create an issue for each so this is for the i.mx6 build
```
-- Build files have been written to: /home/media/OpenELEC.tv/build.OpenELEC-imx6.arm-8.0-devel/libcec-6d68d21/.armv7a…
-
Is the new BSP sumo 2.5 is compatible with pico-imx6 ?
Thanks
-
Currently build mode is hard coded to debug in the `imx6_sabre_lite.cmake` config file.
-
*gumulka:*
I'm not sure on how to solve this issue. Wanting to go from 19.07 to 21.02 I could not build the basic system.
=====Steps to reproduce=====
```
#!/bin/sh
git clone https://git.op…
-
**Description**
Could not install Docker on Debian Stretch in iMX6 board. I am following this link
https://docs.docker.com/install/linux/docker-ce/debian/
**Steps to reproduce the issue:**
1…
-
HEAD is now at a44a45f... TechNexion: pico-imx6: add PICO-IMX6 board support
user@ubuntu:~/GitHub/u-boot-edm$ make pico-imx6ul_defconfig
#
# configuration written to .config
#
user@ubuntu:~/Gi…
-
This is nested in the `adv7610.c` driver (imx6-linux) and configurable as a macro.
-
The hardware-accessorybay.html page says "The IMX6 will connect in device mode if the 3DRBUS pin is not connected to GND. In device mode you can connect the Solo to a computer."
But I can't get this …
-
I am working on iMX6 quad (armv7-a architecture), having vivante GC2000 GPU with OpenCL 1.1 EP support. Is it possible to cross-compile PlaidML for OpenCL 1.1 EP?
-
Have you looked at using the rM kernel sources instead of upstream?
Eeems updated
10 months ago