-
Hi
I tried with much frustration to get this to work.
I was using the web server to -> config -> sensors and choose sensor A as the BME sensor to 280, on bus 77
I was able to check via a python …
-
I had gpio working with "AllSky"; decided to check out "Indi-Allsky" and am getting the following error (I have a dew heater and fan devices installed and setup; I re-ran setup script to make sure gpi…
-
After Saving a Configuration under the Options tab, any attempt to Load results in driver crash. If there are no Configuration files in the /home/stellarmate/.indi/ folder, the driver does not crash.…
-
Several drivers are duplicated in the driver list.
Even if I select one of them, both are checked when I reload web manager.
**To Reproduce**
1. install astroberry-diy. see detail at https://gith…
-
Today it is possible to use the INDI drivers reachable via Indiserver for driving equatorial mounts from Stellarium.
Would it be possible to use the DSC driver from INDI to point accurately Push to d…
-
Hi João, thank you for the great project.
I have two focusers running 2a on an UNO and controlled by INDI Moonlite DRO driver in EKOS, Kstars.
During focusing, the focuser will randomly jump bac…
-
I tried all the functions of the INDI RTL-SDR driver on the driver because I wanted to observe the radio waves, but there were many places where it did not work.
environment
・ Raspberry-Pi4 4GB Bu…
-
It's difficult to control the flat-box in an INDI setup, and impossible to interface it with a Mac.
Please release the source code, or author an INDI driver, or Mac port of the Win/Linux QT softw…
-
INDI Starbook driver does not currently support guiding as reported in the INDI forum thread [PHD2 can't manage to connect the mount](https://indilib.org/forum/general/6915-phd2-can-t-manage-to-connec…
-
Currently, the Indi driver does not support Pulse Guiding over the RS232 port like ASCOM does for the LX200 Classic telescope mount. I spoke to an ASCOM developer and looked at the code and all they a…