-
**Describe the bug**
pump not running despite working Rs485 and app showing green when clicked
**To Reproduce**
Steps to reproduce the behavior:
1. Go to 'dash'
2. Click on 'pool circuit'
3. S…
omo22 updated
3 years ago
-
Yesterday I pulled the latest dashPanel commit and discovered the layout on Chrome appears to be broken. The layout on Edge appears fine. Both browsers are up-to-date. I've included screen shots of…
-
When running the nixie single body with an inteliflow pump I can start the pump via dash panel, but I get error messages as per below and every few minutes the pump stops and then starts again at full…
-
Changing IntelliFlow pump RPM results in outbound message error.
Changing the pump speed results in:
Message aborted after 3 attempt(s): 165,1,16,33,155,47,1,128,0,0,0,6,10,1,11,0,0,0,0,0,0,0,0,…
-
When firing up docker container I get the following:
```shell
% docker run -e SL_IP_ADDRESS=192.168.1.15 -it pent
Connecting to ScreenLogic at 192.168.1.15 on port 80...
Got Screenlogic IP addre…
-
I have poolController running with dasPanel and webClient. I also have a Autelis interface for the Easytouch panel.
Bought a Hubitat Elevation and got "bsileo/hubitat_poolcontroller" running.
Th…
-
![Invalid data error](https://user-images.githubusercontent.com/847116…
-
Any idea it this will work with IntelliPH? In the market to add acid and chlorine pumps for automation.
-
Previously reported here;
https://github.com/tagyoureit/nodejs-poolController/issues/228
At times the PH and ORB readings are not updating, at times they do.
Also the Intelliclor shows green afte…