-
As always, thanks for this work!
On my system I have one filter pump configured in the controller and it has pump circulation settings for the pool and spa set for it. If you call getNumPumps() yo…
-
**Describe the bug**
Hi - I am having problems with not all of my circuits being identified. I was previously using an older version of poolController that had all my circuits. I wanted to update to …
-
moved from: https://github.com/tagyoureit/nodejs-Pentair/issues/55
@rayzorben
rayzorben commented 25 days ago
Got my RS485 USB port, hooked it up to my RPI and got it working today, excellen…
-
**Describe the bug**
pump not running despite working Rs485 and app showing green when clicked
**To Reproduce**
Steps to reproduce the behavior:
1. Go to 'dash'
2. Click on 'pool circuit'
3. S…
omo22 updated
3 years ago
-
**Describe the bug**
I have an EasyTouch that controls all of my Pentair equipment. I have the Pool Controller running this stuff perfectly. However, I also have a Hayward Aquarite Salt system. Is th…
-
**Describe the bug**
The Panel cannot be detected at start. Also, the README needs to be updated with doing the npm install with sudo, and how to clear the config once the nixie controller is selec…
-
**Describe the bug**
As discussed in gitter.im, no output to influx database it seems.
**To Reproduce**
Start up njsPC, check traffic to influx, and as well data inside influx => confirm no data …
arrmo updated
3 years ago
-
I noticed that my schedules in dash don't match my schedules in ScreenLogic.
Attach…
-
The relay is not switching on|off for color changes, it will change on|off for power mode. The actual lights are the MicroBrite lights maybe thats the problem?
![Screen Shot 2021-08-06 at 6 27 56 AM]…
-
### The problem
Attempting to get the new Pentair ScreenLogic Integration running. When adding the integration my Pentair adapter/gateway is found on the network and the integration supplies the cor…