-
Hello eveyone;
I want to send a file using iperf:(From client to server.)
I used below command at server side:
iperf3 -s -F lambo.jpg
And also at client side I used this command:
iperf3…
-
Existing throughput results should also include iperf3 -R tests.
-
What values do we need to monitor to check if there is too much congestion on particular channel during running of iperf3?
-
Hello everyone,
**Description**
I recently experimented a little bit with SCTP and a recent version of CE (18.06.0-ce) and had unpredictable behavior with SCTP protocol, especially when using ip…
-
## TLDR
I set up an iperf3 on a remote machine with `iperf3 -s`, and connected to it on my local box with `iperf3 -c `. bandwhich is able to detect the upload traffic as expected.
However, if I …
-
需求:
1. 在 [2403_mugen失败测试用例清单](https://docs.qq.com/sheet/DSkZMUm9vSHFhTURL?tab=BB08J2) 中找到测试套 iperf3 失败的测试用例
2. 在[openEuler RISC-V 24.03 版本](https://repo.tarsier-infra.isrc.ac.cn/openEuler-RISC-V/t…
-
# Enhancement Request
* Current behavior
iperf3 supports setting affinity to a single CPU, which made sense when it was single threaded
* Desired behavior
Support setting a rage/list of CPUs t…
-
### Description of the problem
The initial setting of iperf3 can only run for 200 seconds before it stops working.
I tried the following:
1. Change the USB port that is inserted. There are 4 U…
-
Hi,
after running iperf3_exporter from time to time and randomly (without a specific pattern) got this error which tells the iperf3 is killed
do you have any idea?
-
CPU usage is high (reach to 80%) and maximum bandwidth is low around ~150Mb/s. any solution? tested with iperf3 on 1Gb port.