-
#将解析出的IPv6地址添加到名称为"rule_vwan2_6"的ipset集
ipset /domain-set:rule_vwan2_6/#6:rule_vwan2_6
#设置 ipset 超时功能启用
ipset-timeout yes
当我设置了ipset-timeout yes后IP并不会添加成功，而注释掉ipset-timeout yes后就能正常添加成功，请问是什么原因？
-
Навскидку, что вспомнил из сделанного:
- таблицы всех перехватов тоже в константах;
- раскидано большое количество комментариев о причинах и необходимых действиях;
- по максимуму использовано имено…
-
Hi,
I currently have a PVE 8.1.x on RISC-V
And I'm stuck on a small problem defining via ipset.
I can't use my firewall as I would like. My configuration works on a classic x86_64.
But here I te…
-
Hi,
Sorry if it's a stupid question but I can't just figure this out
I'm running iptables manually
well it's more through fail2ban really with bits of ufw just to open the ports I need...
The …
-
**Is your feature request related to a problem? Please describe.**
When you use Inline features with a lot of devices, you can notice CPU spikes each [5 minutes](https://github.com/inverse-inc/packet…
-
Currently, the AWS WAFv2 controller for Kubernetes only allows referencing RuleGroups and IPSets in the WebACL Custom Resource (CR) via their ARNs. This creates a challenge because the ARNs contain ra…
-
### What would you like to be added
Please consider adding the ipset(8) type **bitmap:port** to the supported ipset types of firewalld.
### Why is this needed
firewalld supports many ipset …
-
root@Router3Pro:/tmp# opkg install ipset
Installing ipset (7.3-1) to root...
Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/ipset_7.3-1_mipsel_24kc.ipk
Collected error…
-
1. Manually create an ipset named `my-special-ipset`
2. Run the following code:
```
err := netlink.IpsetCreate("my-special-ipset, "hash:ip", netlink.IpsetCreateOptions{Comments: true, Replace:…
-
Hi! When I add only ip address, all good. But when I add skbprio field, get errors and address not added to set ALLOW.
What format of field "skbprio" is should be?
#!/usr/bin/python3
from pyrout…