-
fails at scantool_diag.c Line 365 which leads to iInitbus type not supported by HW.
Presently looking at C code to see for myself.
There's a good possibility it has nothing to do with the program.
…
-
Hi, i bought this dongle from amazon uk. The advert says bluetooth 2.1 but when i got it, it was a more recent version with bluetooth 3.0. I have late 2018 Zoe R110 ZE40. I plug the dongle in, press…
-
When i try to fast init with the correct message
I end up getting a GetLastError failed with result Failed.
I am trying to connect with the message 0x81, 0x10, 0xFC, 0x81, 0x0E but it only returns…
-
I am using an ELM327 bluetooth device which the Elm327 identifier app tells me is version 2.2.It works fine with Torque on android devices. Running DDT4all on a PC with bluetooth pairing set up on com…
-
Hi, I’ve downloaded everything required and set up my arduino as you did in the video.
When arduino is in random data mode i get the normal packets as i should, but when i change it to the mode where…
-
For example ME28.cbf.
Bunch of errors like this:
```
Parsing experimental 0x410 prep with sysparam 17 at #0
0x410 : sys param: 17 for qualifier #0 could not find referenced DiagService with inde…
-
Hi, all
I could approach a new Z.E. 50 Zoe yesterday.
After adding the first 9 digits of the vin to my online vin decoder database, I could identify the new Zoe with the latest iOS beta.
As t…
-
What kind of cable is needed to read J2534? I'm aware of OBD-II to DB9, OBD-II to DB25, OBD-II to USB, OBD-II to Ethernet.
Also, are there protection methods at play that prevent J2534 over CAN acc…
-
First I have to tell your library makes it easy. So now the questions. I don't have one of the ICs readily available (they are order be about a week to get) but I found another circuit that is floa…
-
here are the logs made with software that uses k-line only
it uses 17 data with an average sampling rate between 300ms and 400ms
```
ID,Time,SPEED,RPM,ECT,IAT,MAP,MAP(psi),MAF(Kg/h),MAF(Mg/Stk),S…