-
Operating system: Raspbeery Pi OS 64 bit ("Debian GNU/Linux 11 (bullseye)")
Linux kernel version: Linux raspberrypi 5.15.28-v8+ #1532 SMP PREEMPT Tue Mar 15 13:19:15 GMT 2022 aarch64 GNU/Linux
Pytho…
-
@anandarupmukherjee I don't know how much testing you've done with this, but let me know if you've got ANY gpio lib working within docker on the latest Raspberry Pi OS's. `gpiozero` with `lgpio` work…
-
Raspberry Pi 3.5inch RPi LCD (B) Waveshare
(.venv) pi@digipi:~/.venv/Python_ILI9486 $ sudo ../bin/python image.py
Initialized display with landscape mode = True and dimensions (480, 320)
Loa…
-
Hi
I'm trying to run this on the Raspberry Pi 5, but as soon as I run the flick-demo, I get:
`RuntimeError: Cannot determine SOC peripheral base address
`
I found that this pi is really differ…
-
I have a problem when I run the pibooth, the message is
booth@raspberrypi:~ $ pibooth
pygame 2.1.2 (SDL 2.26.5, Python 3.11.2)
Hello from the pygame community. https://www.pygame.org/contribute.…
-
Operating system: Raspbian Bookworm
Python version: 3.11.2
Pi model: 3 Model B Rev 1.2
GPIO Zero version: 2.0
Pin factory used: lgpio
The code:
```python
from gpiozero import LEDCharDisplay
…
-
Whenever I attempt to out right read a gpio pin, the pin is set to low and low is always returned to this script. No idea why! Scripts not using sys.argv, but with fixed pins seem to work ok. I use…
mcgoy updated
4 months ago
-
I installed rpi-lgpio yesterday and setup a basic test program using GPIO2 and GPIO3 as inputs with the following basic program
```
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BOARD)
GPIO.setup(3,…
-
So far I haven't found any performance data compared to RPi.GPIO. With RPi.GPIO I had no problems with a Python script for the HX711 load cell controller with a Pi Zero 2W under Bookworm OS. After I r…
-
### Describe the bug
In this thread (https://forums.raspberrypi.com/viewtopic.php?p=2218276#p2218276) it has been concluded that enabling 1-Wire protocol in the Raspberry Pi Configuration window, a…