-
According to the spec, LLCC68 support SF5~9 @ 125K BW, SF5~10 @250K BW, SF5~11 @ 500K BW
When I was playing, I found it always failed with code -20 if SF >9 when it was doing initialization.
Looks l…
-
### The problem
external library compilation error
### Which version of ESPHome has the issue?
2023.12.5
### What type of installation are you using?
Docker
### Which version of Home Assistant h…
-
Hello,
I am trying to apply this project to LLCC68 radio chip. However, when I read through `lbm_lib\smtc_modem_core\smtc_ralf\src`, there is no files like ralf_llcc68.c, while in` smtc_ral\src`, I…
ltmzk updated
7 months ago
-
### Category
Other
### Hardware
Rak4631
### Firmware Version
2.5.8.2ba72c15
### Description
When trying to compile customized firmware (using a fresh clone of the master branch) for a device _b…
-
Hi Stuart, I am trying to use your example code 23 tracker and 24 receiver for SX126X. The transmitter seems to be working fine but not the receiver. Despite the settings.h frequency being set to 4340…
-
### Category
Other
### Hardware
DIY
### Firmware Version
2.5.8.6485f03
### Description
I'm using DIY NRF5280 ProMicro with TCXO.
The GPS Module is a HGLRC M100 5883 (I am sure it's working bec…
-
Can you update an example of the Arduino UNO platform LLCC68? Thank you!
topmy updated
8 months ago
-
### SOC
ESP32
### Lora IC
DL-CC68-S-868
### Product Link
https://www.samsclub.com/p/circuitmess-chatter-stem-project-build-and-code-walkie-talkies/PL980418145
### Description
Requesting reconsi…
-
**Describe the bug**
I am using the LoRaWAN example with an LLCC68 on EU868.
However, beginOTAA fails during checkADB. It seems to be related to the limited supported SF of LLCC68.
See output:
…
lioff updated
9 months ago
-
Hey everyone,
I am trying to set up a communication between two esp32 (WROOM-32) with a EBYTE E220-900T22D.
The ESP is flashed with Micropython 1.21.0 (I also tried 1.22.0) and I did the wiring …