-
Thanks for your work sven, i am using your software on one of daniels boards, great stuff!
Previously i was simply cutting power to the whole boiler, and monitored temperatures via DS18B20 sensors. I…
-
Bosch info
There are problems with config of your thermostat.
You might have unsupported firmware version 04.06.07.
**Version**
- Home Assistant 2023.9.3
- HA Bosch component version= iCom_…
-
since a while my seperate heating circuits disapeared.
before I had 3 seperate circurits with all data.
Buderus GB142; Buderus Logamatic R4121; MEC 2; FM442; KM200
-
### PROBLEM DESCRIPTION
I want to use MQTT but not TLS and port 31883.
According to https://github.com/emsesp/EMS-ESP32/blob/e00eb8e64f1926a6eda8075c34afd8cca38a37d6/lib/framework/MqttSettingsSer…
-
Hallo @frankjoke
Ich habe folgenden Request.
Vielleicht könnte dies integriert werden.
Ich benutze die Adapter Version 2.0.3.
Leider ist in dem Adapter das Buderus KM200 HRV Gateway für Logav…
-
HK2_Heizsystem zeigt bei mir Heizkörper an obwohl der Heizkreis auf Fussboden eingestellt ist.
![Screenshot 2023-07-05 173502](https://github.com/dewenni/ESP_Buderus_KM271/assets/37806858/6756897f-…
-
Ich bekomme keine Aktualisierungen bei den Warmwasser-Werten.
Buderus Heizkessel GB 162
Verwendete Heizungs-Regelung: Buderus Logamatic 4000
[emsesp_info.txt](https://github.com/emsesp/EMS-ESP32/fi…
-
### PROBLEM DESCRIPTION
Hi there, I'm new to this project.
Started with integration of my heatpump and was very happy about the integration. That's why decided to hook up my Gasboiler, too. Unfor…
-
**PROBLEM DESCRIPTION**
My system setup is the following:
Buderus Logatherm WLW176i-12 T180 heatpump
Buderus GUI Logamatic BC400 (integrated in heatpump unit for control unit XCU-THH-11.)
Bud…
-
### PROBLEM DESCRIPTION
When using `wwcirc` command, the values `continuous` and `off` do not seem to written properly, the value inside the boiler does not change. Writing `1x3min` or `6x3min` wor…
ptwz updated
8 months ago