-
I have two new V1.3 TTGO-Lora32 and as far as I can tell everything is configured correctly but the display is either blank or not working. I know the display is good because it worked with the stock…
-
Update: See [further below](https://github.com/lnlp/LMIC-node/issues/45#issuecomment-1173196192) for a more complete description of the workaround.
---
I have observed a bootloop after using the…
-
### Current Situation
Hey,
I have TTGO Lora 32 V2.1.6 flashed with fsk version of OpenMQTTGateway and Nooelec RTL-SDR both listening at 868.95Mhz but one parsing signal from water meter using Wire…
-
With my TTGO 868/915mhz Model: LORA32 screen is off.
I change pinout to 4 an oled to 1, but it doesn't work.
-
The nodename returned by uname seems to be hard coded.
To be compatible with RPi and PC it should specify the network hostname.
There should be a way to change the nodename and use that as default…
-
**Describe the bug**
TTGO Lora32 V2.1 Does not boot image after upload via Upload File System image in PlatformIO.
Build ok in PlatformIO
Upload ok in PlatformIO
Board stays with the meshtastic …
-
In your [documentation](https://github.com/HelTecAutomation/HeltecDocs/blob/master/doc/node/esp32/source/hardware_update_log.md), Heltec LoRa 32 v3.1 is not shown.
Also, v3.0 is now a dead link in …
-
T-Beam 1.1 wird als Lora32 V2 board erkannt.
Dadurch keine Funktion des Beacon Buttons
Board im json fixiert auf T-Beam1 dann funktioniert auch der Button.
-
I have been using ttgo-lora32-v1, and it has worked, but I figured it would make sense to ask, since I haven't seen a definitive answer and the TTGO T-Display doesn't match any of the board names avai…
-
Hi there, I had the gateway running for a while with a Lora32 module accessed via WiFi, but had two mayor problems:
- The connection to the Meshtastic devices sometimes somehow takes too long and t…