-
If possible via software, please consider reducing the "L" power level to something more reasonable. Currently, it is over 2.7 W for L power on 2m and over 2.4 W on 70cm. See [this video](https://www.…
-
Hey Folks
I have been working on getting LoRaLayer2 working for the purposes of sending sensor data. I'm very excited to have a mesh solution that will have the ability to resolve the line to sight…
-
LORADUINO---anyone knows how to put this into low power mode , ( i removed voltage regulator, led , memory ) and still in low power mode , and lora.sleep i got more then 220uA ???. by the way board i…
-
Enter CPU sleep modes instead of busy waiting or delay(), to reduce power usage.
Use ADC Noise Canceler mode on AVR.
From the Atmega328P docs:
24.6 ADC Noise Canceler
The ADC features a noise canc…
-
Hi,
Is there a command of the library to put the DF Player Mini in a low power mode?
I have tried with the function sleep() but the consumption remains the same as in normal operation (around 20…
-
Is there any plans to have a version that supports the Coral TPU for low power devices / augment your pi support?
(i am unclear how good a pi is at deeps stack tasks compared to say Nvidia GPUs and t…
scyto updated
2 months ago
-
While troubleshooting a problem i was facing, in the configuration.yaml i enabled ZHA logs and i noticed that the radio module was set with a very low Tx power (8).
`2021-01-25 09:04:00 INFO (MainThr…
-
![image](https://github.com/olikraus/u8g2/assets/48545796/279f4d92-64df-45ac-88d8-e2f0705b4771)
Hi
The display doesn't need a backlight so it's very low power, typically about 30µA at 3.3V, which …
-
It would be great if there would be some extra settings to be able to use the app in a way that it can be active constantly without using too much power:
- higher recording intervals, eg 60 or 120 se…
-
Can't get the low power mode from the atmega in combination with the RN2483 to work.
I want to create a sampling application which samples at a frequency of 15 minutes.
For this we put the atmega …