-
**Issue by [machinekoder](https://github.com/machinekoder)**
_Mon Nov 3 09:24:09 2014_
_Originally opened as https://github.com/machinekit/machinekit/issues/357_
----
Most user interfaces have lot…
-
**Issue by [machinekoder](https://github.com/machinekoder)**
_Mon Jan 11 16:33:52 2016_
_Originally opened as https://github.com/machinekit/machinekit/issues/859_
----
The router sockets used in Ma…
-
**Issue by [luminize](https://github.com/luminize)**
_Sat Apr 25 19:12:09 2015_
_Originally opened as https://github.com/machinekit/machinekit/issues/589_
----
As a subissue of https://github.com/m…
-
I've adapted your config to my laser and have been using it for vector cutting and engraving for a long time (using both magic Z and M62/M63) but have never been able to get raster engraving to work. …
-
One of the major effects that is still seen with bowden extruders is filament deficiency during acceleration and surplus during deceleration. @bkubicek has a solution proposed at:
http://bernhardkubi…
-
The builds of the website have not worked since February 9th 2017.
The first problem, is the changes to machinekit-protobuf since this commit
https://github.com/machinekit/machinetalk-protobuf/com…
-
**Issue by [cdsteinkuehler](https://github.com/cdsteinkuehler)**
_Fri Oct 14 00:11:52 2016_
_Originally opened as https://github.com/machinekit/machinekit/issues/1076_
----
I'm not sure I completel…
-
I would like to dedicate this issue to tracking progress, ideas and problems with porting (and running) LinuxCNC@master atop the Machinekit-HAL@master. This discussion was already partially broached i…
cerna updated
2 years ago
-
https://github.com/machinekit/machinekit/blob/9239acbee0f84edd94615b5e33e40e724c913ff9/src/emc/rs274ngc/interp_convert.cc#L4571
I try adding W axis to rigid tapping ?
It is possible to merge if …
-
**Issue by [luminize](https://github.com/luminize)**
_Mon May 19 06:42:37 2014_
_Originally opened as https://github.com/machinekit/machinekit/issues/193_
----
In these two thread is some discussio…