-
### Environment
* Elixir version (`elixir -v`): `1.16.1`
* Nerves environment: (`mix nerves.env --info`): `MIX_TARGET: rpi3`, `MIX_ENV: dev`
### Current behavior
When following the tutorial li…
-
I am getting the following error when running `mix compile`.
```
Generated scenic_driver_local app
SCENIC_LOCAL_TARGET: cairo-fb
SCENIC_LOCAL_GL: gles3
------ no SCENIC_LOCAL_TARGET set ------
…
-
```
WARNING: u-boot-allwinnerd1-1_1.0-r0 do_fetch: Failed to fetch URL git://github.com/smaeul/u-boot.git;protocol=https;branch=d1-wip, attempting MIRRORS if available
ERROR: u-boot-allwinnerd1-1_1.…
-
I tried to compile & run the bootloader along with the attached kernel zImage and dtb, but was never able to get any logs from the kernel.
# Related Hardware
LCTechPi-PC-F133-v1.2 [(schematic + inf…
-
I tried this code on Armbian on MangoPi MQ-Pro, RISC-V:
```rust
fn main() {
println!("Hello, world!");
}
```
I expected to see this happen: standard compilation
Instead, this happ…
-
This issue tracks testing on various systems.
Two kinds of tests are useful to report:
1. Testing in apps that use Circuits.GPIO v1. See the [porting guide](https://github.com/elixir-circuits/ci…
-
I did the fallowing
mkdir moelinux
cd moelinux
repo init -u https://github.com/landgraf/moelinux.git
repo sync --no-clone-bundle
TEMPLATECONF="../meta-moelinux/conf/templates/moelinux/" . ./co…
-
Currently, we can only boot MnemOS on the D1 by writing the kernel directly into the D1's DDR using `xfel`. This is not ideal. Instead, we should be able to put the kernel image either in flash or on …
hawkw updated
5 months ago
-
Hi Nick,
Fantastic work on the LicheePi Nano. I was hoping to use your repo as a starting point to getting the MangoPi-R3c board working, as the vendors Buildroot repo [here](https://github.com/ma…
-
**OS image source:**
https://mangopi.org/mqquad under the "FW&SDK" section
Debian IMG with XFCE from the MEGA link: https://mega.nz/file/7L5w3CyD#ClAPLD9zHpwiIeM9JarotuU44G66ELNpPulKMwVnyiM
…