-
Hallo,
I have an M-Bus Water Mereting installed on my site (https://process.honeywell.com/us/en/products/utilities/water/digital-metering/mbus/falcon-mj-pulse-mbus).
I guess the "OBIS Value Grou…
-
I have written an esp32 mbus scanner for reading the smartmeter of my energy provider.
It uses an mbus scanner attached to uart (from MikroElektronika).
That worked fine before the following was …
-
stampzilla-mbus[2334]: time="2023-04-01T22:14:04.113409363+02:00" level=error msg="error fetching mbus data from device 3: write tcp 192.168.13.2:38246->192.168.13.42:10001: write: broken pipe" func="…
-
**Describe the bug**
Beim Abfragen eines ABB B23 113 100 Zählers wird ein Datenpunkt "mbus.0.ABB-1478077.data.11-More records follow" angelegt.
**Screenshots & Logfiles**
```
2022-06-29 12…
-
Hello there !
I'm not able to get device info:
```
mbus-serial-request-data-multi-reply -d -b 2400 /dev/ttyS1 2
init_slaves: debug: sending init frame #1
[2023-04-03 16:54:25Z] SEND (005): …
-
Hello,
In my case: Unipi G100 + M-Bus to RS485 converter + 9 x Qundis heat meters,
libmbus cannot find or read any device. Increasing time from default 300ms to min. 1100ms (baud: 2400) solves this …
-
Auf meiner IOBroker Maschine nutze ich aktuell zwei Mbus Instanzen (mbus.0 und mbus.1) zusammen mit zwei identischen MBUS Dongle, die per USB angeschlossen sind. An einem Dongle sind die Wärmemengenzä…
-
PR #168 executes the code for normalized output, which probably has not been executed so much until now.
As found here https://github.com/rscada/libmbus/pull/168#issuecomment-651723887
running `mb…
-
Moin,
ich hatte das Thema schon im Forum angesprochen, fällt da aber leider runter.
Aus dem Grund, nach Rücksprache, hier als Issue :)
Forum-Link: https://forum.iobroker.net/topic/51270/adapter…
-
I think there is a typo in https://github.com/rscada/python-mbus/blob/master/mbus/MBusFrame.py#L21
the field `stop` is a duplicate and the second instance probably should be `type`, according to htt…
eht16 updated
5 years ago