-
when pressure test was performed, write() to can0 will stuck, and the "dmesg | grep spi" will report:
`[13378.996137] mcp25xxfd spi0.0 can0: Something is wrong - we got a TEF interrupt but we were …
-
Hi,
I'm evaluating the PICAN FD Duo board from Skpang. To test it out, I've connected can0 to can1 and running `cangen -g 0 -m can0`. After a short period of time, the command will exit with a mess…
-
Hi Adam et al.,
I have one CANBED DUAL hanging around and decided to put it in something useful. I had doubts, (confirmed), that it won't work with your code without some intervention and augmentat…
-
Hello!
First of all, thanks a lot for the library.
I currently have a MCP2518FD-Click and i wanted to use it along with my Arduino 33 nano BLE.
I already tried the example LoopBackDemoArduinoUn…
-
I'm not sure of the details to set this up.. but the Bolt EV is need of the swcan? The ODB2 port goes to "sleep" after a while and doesn't respond to commands.
-
Hello.
Congratulations for the great project supporting CANBUS on Rp2040 using MicroPython!
I would like to use MicroPython on the rp2040/RPico (CANPico) for realtime communication using CANPico…
-
I have MCP2518 + ESP32 but I get errors on trying to receive/transmit
Log:
`CANBus error
****************11010001
110
**MCP2517 Init Success
************************************************Res…
-
I have been using the Teensy 3.6 with this library and have had no problems. Now I decided to upgrade to the Teensy 4.0, but I am having an error when compiling with the new one. When compiling on the…
-
I know this probably isn't the right place to ask but I would like to do some prototyping in Micropython using an RP2040 / MCP251863 on a custom PCB I am designing (to control over 70 clock faces usin…
-
I think the current way of how the software/hardware buffers are handled is not ideal and I would suggest doing the following: If the software buffers are full do not simply drop the hardware buffers …