-
This doesn't happen on 0.3.4. From power on there is no audio unless the vol pot is set to or turned at least halfway on. Once audio is present it behaves normally, except for the high minimum audio l…
-
I cannot set 1 watt on both M17 and FM modes in my MD-UV380. When I set 1 watt on either mode then change to the other mode that mode is at 5 watts. If I change it to 1 watt then when I go back to the…
-
I vaguely recall seeing a schematic of the SA868 module (what's going on inside it!) somewhere, but I can't find it again.
It would be good to have this linked to from this repository, as knowing w…
-
When I transmit with my MD-UV380 with "ECHO" set as destination I get this in the live logs:
M: 2023-03-11 18:04:05.192 M17, received RF late entry voice transmission from K9OJ to ECHO
M: 2023-03-11…
-
Debian GNU/Linux host OS (bookworm/sid)
unpack editcp-1.0.31 and copy 99-md380.rules where it needs to go, sudo udevadm trigger
radio is TYT model MD-UV380 136-174MHz/400-480MHz
radio info screen…
-
When running commit c0486fea7d8a0dbc53d52fcfd784f75b3fb28626 on my MD-UV380/RT3S, the UI locks up after changing the mode through the Macro-menu away from M17 and back to M17. Pressing PTT refreshes t…
-
How about adding some support for the [M17 mode](https://m17project.org)?
-
dzcb often creates two conflicting fields for the ColorCode of a channel, in cases where the color code is not 1. You can observe this as follows:
* Retrieve the [latest codeplug from mycodeplug/exa…
-
I am experiencing a failure when the action is attempting to run. The log archive is attached for reference. I don't know how to interpret all the info, but it seems there is an issue highlighted in…
-
This radio may be identical to the MD-UV390. Should be checked though. If not verify codeplug elements. That is,
- [ ] Timestamp
- [ ] General settings
- [ ] Menu settings
- [ ] Button settings
…