-
After [accepting the alpha version of the code](https://github.com/Koenkk/zigbee-herdsman/pull/317), now I propose to write comments here until we complete the development.
The adapter is designed …
-
I use the tuya air quality sensor. It is a slightly different, round [version](https://nl.aliexpress.com/item/1005002511043244.html), but the thumbprints are matching.
(i had some trouble setting …
-
**Describe the bug**
I'm seeing a case where a BR is holding on to a stale eidcache
```
> eidcache
fd2f:2067:77a8:1:1058:fc0e:1593:be16 a000 cache canEvict=1 transTime=0 eid=fdcf:8d62:8570:0:f22…
-
**Describe the bug**
ZHA reports iTead Sonoff ZBMini-L to have successfully paired, but ZBMini-L does not leave pairing mode and tries to pair over and over again. While the device is still re-pairin…
veitw updated
10 months ago
-
### The problem
I'm not sure exactly when this started happening, but have tried to add 3 different TRADFRI Shortcut buttons with fresh batteries via ZHA and they are not binding events. Have gone …
-
Question to the developer of firmware for SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2.
The system has:
1. SONOFF_Zigbee_3.0_USB_Dongle_Plus_V2. with firmware 7.1.1.0 build 273
2. Zigbee2MQTT version 1.…
-
Currently bellows overrides firmware settings for a lot of ezsp settings to very conservative settings. I think historically this was to combat poor firmware. But with newer devices based on the MG12/…
-
I've asked about this a long while ago, no progress in years. So do you even consider making biglybt private tracker friendly or just don't care?
lit6z updated
9 months ago
-
### Describe the issue you are experiencing
I'm having a boot-loop issue with SkyConnect (Thread only) running on HAOS on a Pi4.
Anecdotally it seems to be worse with more devices on the mesh.
I cu…
-
```
`sudo python3 Elelabs_EzspFwUtility.py flash -f ./data/EFR32MG21/ELU0141_MG21_zb_ncp_6103_211204.gbl -p /dev/ttyUSB2`
2023/01/23 12:06:08 Elelabs_EzspFwUtility: EZSP adapter in bootloader mode…