-
-
**Describe the problem you have/What new integration you would like**
hi
Yesterday I have tested my prototype of air quality station with pms7003 and found that PMSX003 reports data too freq…
-
Hallo Mr. Takeyuki and everyone,
I still have a problem with my MH-Z19C sensor, it is still always treturn {}, can someone help me? is it compatible for the MH-Z19C or only for B? I already read ma…
-
Hi all,
I have an Mh-z19c connected to a Pi Zero W with TxD and RxD cross connected to pins 8 (GPIO 14) and 10 (GPIO 15) as per the repo readme and I see an orange light flashing inside indicating …
-
It appears that the package hpsaturn/CanAirIO Air Quality Sensors Library is no longer available at version 0.5.4, nor are some of its dependencies. Newer versions of the library dont seem to work cor…
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Homeassistant managed on RaspiOS
**ESP (ESP32/ESP8266, Board/Sonoff):**
Shelly 1, Sonoff T1
**ESPHome version (latest prod…
-
Hi,
I wanted to give a try with your non blocking library,
But I can't successfully compile it with arduino IDE 2.3.2.
The board I use is a ESP32 developpement board with 38 yellow pins https://a…
esp13 updated
2 months ago
-
Thanks for this usefull package and the clear documentation! The installation went well on a RPI 3B and I got sensor readings. I want to use the sensor in Python programs and so I want to get rid of t…
-
### The problem
Similarly to #488, I get "Reading from UART timed out at byte 0!" error messages with the MH-Z19C (https://www.ebay.de/itm/225181851233).
As shown in the logs and yaml below, I a…