-
Dear author:
## Issue Description
I am encountering two issues while using Fuzzware for firmware simulation:
### Issue 1: Unexpected Files in base_inputs Directory
After specifying the fuzz te…
-
Just tried out the AVR8js version. This combo with circuitjs1/falstad makes it a very very powerful combination indeed. Thanks for providing this!
A couple of questions and suggestions:
1. analo…
-
I was trying to make the Grbl CNC software (https://github.com/gnea/grbl-Mega) work with some steppers in a couple sketches like https://wokwi.com/projects/328566930816369236 or the Uno like https://w…
drf5n updated
4 months ago
-
You might well know and have considered these, but anyway...
Use a pnp mirror, then the kbd is grounded, which makes emc/filtering and static discharge resistance easier to manage.
(also means th…
-
Hi,
Currently, if you use a match trigger type 2 on a load/store address, the riscv openocd port only accept implementation with tdata1.timing=0
It is done on purpose ? or maybe we could add the…
-
ROS - the [Robot Operating System](https://www.ros.org/) - is a powerful open source collection of software for the development of advanced robotics. The core appeal of the system is that it can tie m…
-
Hi,
Are there any test results from the silicon which was taped out for core-v-mcu?
Thanks
-
Here's a little standalone example showing what I mean, along with a makefile that counts the size of the resulting C file in bytes. Look for the XXX in the Haskell code and you'll be able to reprodu…
-
Hello, I am doing this tutorial for cross compilers: http://www.throwtheswitch.org/build/cross
It already works, but with workarounds. A short summary of what I am doing:
- Unit Tests for a Microc…
-
Dear all,
In my application, the ESP32 completely gets stuck after about 1sec. if I short the CAN wires (CAN-J and CAN-L connected).
Unfortunately I couldn't manage to reset the ESP32 as the inter…