-
Hi, I’ve got a RPI 3B+ with Rasbian 10. I follow your instruction to install the gateway with virtualenv to use it with miflora. The installation seams good, no error, I installed the miflora library,…
-
Please add support Russian language.
-
Hi Guys,
I use this plugin to get some informations from my Mi Flower Care to my HomeKit, but I have some Problems.
At the moment I get the humidity, battery and Temperatur. What I also need is:
…
-
Hi,
Don´t know why ... no errors present in the log. MiFlora sensor works fine.
But the only way to aquire new meassurments is to deactivate and reactivate the sensor on input tab.
Mycodo 8.10.…
-
Hello
i have miflora platform setup..i wish to use this card but having difficulties
i think plant must be setup but i dont understaand instructions.
can make step by step instruction from scratch…
-
I have installed miflora sensors in my garden which indicate, among other things, the degree of humidity in the ground. It would be very useful to be able to integrate these data for the calculation o…
-
Hi,
I have uploaded the sketch on an esp32 board (wroom32), but i have strange value from my 3 miflora.
Where Is the problem?
The configuration Is stock, I have only changed the wifi, mqtt and mac …
-
raspberry pi zero w (with ble),
uname -a
Linux 4.19.75+ #1270 Tue Sep 24 18:38:54 BST 2019 armv6l GNU/Linux
cat /etc/*-release
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Li…
-
[x] I've read the [Troubleshooting Wiki](https://github.com/zewelor/bt-mqtt-gateway/wiki/Troubleshooting), my problem is not described there and I am already using the specified minimum bluez version…
-
On Homeassistant the following payload is received for the battery:
I would like that the sensors in homeassistant are longer available before their values are discarded:
Can "expire_after" be added…