-
It would be nice to have more documentation about keyed nodes, and the cases where they should be used, where should not be used and how to use them. In Miso code itself are just only a couple specifi…
-
I'm making it by your schematics but not works, finally i found there is something wrong in MOSI & MISO pins, it seems like be MOSI = 13 & MISO = 12, may be my "arduino_pins.h" is not the currect vers…
-
There should be a pull up on the MISO pin in the device specific radiopinfunctions.c
set_bit(PORT, PIN_MISO); // MISO pull up
Was not able to communicate over SPI without it.
-
It would be great if the component could use the default SPI component for assignment of MISO/MOSI/CLK. That would allow for sharing the MISO/MOSI/CLK pins with other SPI devices.
spi:
clk_pi…
-
Hello
I am trying to run miso but I am getting this error after having installed it successfully
`debian@username:~$ miso`
Traceback (most recent call last):
File "/home/debian/.local/bin/mis…
-
Hi,
I'm using Miso to estimate exon skipping alternative events. When I repeat the analysis several times (using the same files) I have the same events in the comparisons output file with the bayes…
-
Hello Yarden,
I ran this command: [ $ python -m unittest discover misopy]
according to the manual : https://miso.readthedocs.io/en/fastmiso/#installing-the-fastmiso version-of-miso
#
Python versio…
-
Hi,
On Jamer. I get
Transmission failed, though scanning and analyzing works,
![image](https://github.com/user-attachments/assets/f3aac883-632e-4ff6-a6a0-c066de89fe08)
so the NRF seems ali…
-
with Curry Tofu
-
Some time ago I discovered that @dmjio released [Miso](https://haskell-miso.org/), a great GUI framework based on Elm.
Right now we are relying on our `Ulmus` module, that emulates the Elm architec…