-
**Feature Request: Allow printing the RSSI values**
Please allow the printing of RSSI values. (Weird negative strength values where the larger values ie closer to zero mean the radio signal is stro…
-
Hello,
first, @facchinm thanks for the awesome library!
I found in your example (listed bellow) that the library is intended for MKR WAN 1300 board. Will the library offer support for the new …
-
Hello,
Maybe I'm missing something but I noticed two problems when two MKRWAN 1300 are used to exchange frames at high rate (50-80 packets per second).
The first one is that the base address of the …
-
It seems setting the data rate via dataRate() doesn't work at all and this is a known issue. There is a workaround I confirmed myself that works, but the workaround requires use of ADR that makes the …
-
Is there a plan to implement this erratum? I suspect this makes the receiver sensitive to non-LoRa signals as interference, especially in the narrower bandwidths.
![image](https://user-images.githu…
-
Hello Everyone,
Great library, and it has served me well over the past couple years. Thank you for your hard work.
I recently encountered an issue with my Adafruit Feather M0-based board (SAMD2…
-
Does anyone know where can I get AT commands for the firmware that uses MKRWANv2?
-
Have read a lot of material on using the Arduino Portenta H7 combined with Vision Shield - LoRa. Have also experimented with the combined devices. Can access the camera and partition its data into LoR…
-
Hi,
I have range issues with my LORA sensor network and while debugging the whole thing I've noticed joinOTTA is not using SF12 as expected, but it uses mostly SF7 with some random changes to highe…
-
The `LoraSendAndReceive` uses `available()` to check if there is a response after send a packet, is there any reason `parsePacket()` is not used in the example?