-
### Enhancement summary
In large fabrics, a large number of endpoints may be dual homed to two leafs. Currently in AVD this has to be done via individual configuration for each endpoint.
Ideally w…
-
### As ...
Patti - Platform Admin
### I want ...
to understand how to model devices that are in someway paired to each other
### So that ...
There is a clearly documented method for what is suppo…
-
### Issue Summary
We have a deployment for Campus with L2LS inband. It requires routing in the Spines with OSPF.
When we use OSPF + inband mgmt, the following configuration is created :
```
in…
-
### Enhancement summary
When peering a Tenant/VRF to an external router, the router on the other side sees the MLAG/L3_MLAG addresses being advertised:
```
B E 10.1.10.0/24 [200/0] via 10…
-
See https://www.arista.com/en/um-eos/eos-acls-and-route-maps#xx1148961 under "IPv4 ACL Rule Parameters". The ones that trip me up are ttl and tracked. Example below.
configs/Switch5 | 536 | 110 p…
-
### Enhancement summary
If an SVI or VLAN is not stretched across a VXLAN fabric, set `vxlan: false`.
This will avoid `show vxlan config-sanity` "Flood List" failures and unnecessary advertiseme…
-
### Enhancement summary
Add Molecule scenario for evpn-mpls, isis-sr & evpn-ipvpn-gateway
Use A/A & MLAG if supported.
A few services and endpoints.
### Which component of AVD is impacted
other…
-
DC1_SPINE1#sh run | s router bgp
router bgp 65001
router-id 192.168.255.1
no bgp default ipv4-unicast
distance bgp 20 200 200
maximum-paths 4 ecmp 4
neighbor EVPN-OVERLAY-PEERS pe…
-
### Enhancement summary
When creating a change control we can run custom actions, but unable to add a snapshot to the change control sequence. Would like to be able to run a pre and post snapshot be…
-
Hello!
I'm trying to build frr for openwrt 18.06.5 using http://docs.frrouting.org/projects/dev-guide/en/latest/building-frr-for-openwrt.html
Error is:
checking for LIBYANG (libyang >= 0…