-
The right side motors are working correctly, but the left side is NOT working correctly. Not sure if this is related to the hardware or to the software. Need to come up with a debug plan. We could use…
-
- [VZ30C1T8219732L](https://www.vybronics.com/erm-cylindrical-vibration-motors/smd/v-z30c1t8219732l)
- Available at [Digikey](https://www.digikey.de/de/products/detail/vybronics-inc/VZ30C1T8219732L/1…
Kampi updated
3 weeks ago
-
### Prerequisites
- [x] I have carried out troubleshooting steps and I believe I have found a bug.
- [x] I have searched for similar bugs in both open and closed issues and cannot find a duplicate.
…
-
### Variant
ADC
### Control type
FOC
### Control mode
Torque
### Description
I built a scooter with two motors mounted on the back. When the motors screwed together and working with hall sensor…
-
Hi!! Very good and excellent work. I have a slightly strange problem with the shaker. I have used a motor from a PS2 controller and it works very well. The problem is that if I try to connect a differ…
-
De "[Reely 536014C Reserveonderdeel Motorhouder](https://www.conrad.be/nl/p/reely-536014c-reserveonderdeel-motorhouder-1418556.html)" uit de BoM is overal uitverkocht (conrad, bol, amazon, ...). Kent …
-
- Flaps mid(dle)
- Glow on / activated?
- Glow off / deactivated?
- Motor ON
- Motor OFF
- Motor Idle
- Autorotation
- Rescue ON
- High Temperature
- High Vibration
-
Lets say I have a stepper motor driver, and I want to keep track of the total number of steps that I have commanded to the motor. Is there a way to have the 'motor move' command packet update a TLM pa…
-
When I search in JEI fo lub, nothing shows. When I searched in creative menu, I also cannto find it. Am I doing something wrong, or did I download wrong version?
-
I'm not quite sure the problem, it may be due to current/voltage, or the wiring of the `stepper -> TMC2209`. The wiring should be the same as [this schematic](https://github.com/quintindunn/StringArtR…