-
For some reason, the serial number string is blank with the SNAP and PICkit4.
It does however work with pkobn_updi (nEDBG) and mEDBG boards.
@janegilruud is there a different command we have to us…
-
Ref: https://www.eevblog.com/forum/projects/programming-atmega328p-using-pickit3/ (Question asked)
Ref: https://github.com/martonmiklos/pk2cmd (adding PICkit 3 scripting FW support to pk2cmd which is…
-
I am using avrdude with a Microchip Snap Debugger as a UPDI programmer only (no debugging).
Everything works really well with the SNAP programmer with only one exception:
If you program the lock bit…
-
I'm running Manjaro (Arch Linux) and am having problems using avrdude programming an Uno with a Microchip SNAP. I have been successful using the same hardware combination and command on macOS Monterey…
-
I use MPLAB SNAP. And i try pymcuprog ping
But i can not connect. Mainly because the used device is not a HID device.
So is there something i miss? Is it a bug? Has this been actual tested with MPLA…
-
Hi i use :
pymcuprog ping
I get this output:
Connecting to anything possible
pyedbglib.hidtransport.hidtransportbase - ERROR - No CMSIS-DAP devices found.
Unable to connect to USB device
But …
-
i wanted to try pymcuprog and i get errors about no device found.
so i checked the module responsible and that is hidapi.
when i try : py -c "import hid; hid.device().open_path(hid.enumerate()[0]…
-
From here by @stefanrueger
https://github.com/avrdudes/avrdude/pull/1125#issuecomment-1280512460
> Mixing the progress bar with warning messages is a really hard task: I have added code elsewhere t…
-
The MPLAB PICkit 4 debug tool appears to work in a similar way to the MPLAB Snap; It appears to be a hybrid device that can present itself as an EDBG device, via a firmware update.
Adding support …
-
in the Spencekonde AtmegaTiny core it is possible to program the Attiny0,1 and 2 Series with PYupdi just using a serial adapter and a single resistor. This words fine, even for the DX cores. It should…