-
I've paired to my SmartShunt over Bluetooth and mapped /dev/rfcomm0 - but what port and/or --porttype should I be using to make this work?
-
Use this issue to further discuss purpose
I'll update the discussion doc with content from here
Also note here (or PR) any alterations needed in discussion doc
-
hi i would like to read qall and not qpigs where and how can i change that? have easun smr II and in qpigs not everything is sent eg discharge current
protocol:
[https://docs.google.com/document/d/1…
-
The calculated "open sensor" temperature on the MPP 2420 LC is around -32.5 and not below -50 as required for
https://github.com/LibreSolar/charge-controller-firmware/blob/a56b0d0e8046fcb911dd2a21…
-
Hello, can you also adjust this project so that the Mppsolar Hybrid V2 is supported with the P18 Protocoll?
At that time I adjusted the code at JBlance / MPP solar so that almost all functions of t…
-
Can we maybe get the source code?
-
-
After updating Home Assistant to version 2023.8.3, I noticed the following notification in Home Assistant:
> Some MQTT entities have an entity name that starts with the device name. This is not exp…
-
Is there any information how to read status over Bluetooth in Voltronics / Axpert and clones
All they are controlled by WatchPower app on android
Mostly all Inverters with this control panel.
![ima…
-
Hi,
you make great videos, so thanks for making them! :-)
I have a question about this PWM controller. As I understand it, you measure the voltage at the battery, and if it is below maximum char…