-
### Problem Description
We have been using eCAL on embedded system. A typical opertion procedure is that:
- Host laptop connect to the embedded device using Ethernet cable
- Host starts eCAL pub no…
-
### Is there an existing issue for this?
- [x] I have searched the existing issues
### Version
equal or higher than v1.14.13 and lower than v1.15.0
### What happened?
Cilium on Standalone mode is…
-
您的 Armbian 设备在 kernel version 上运行，该版本可能缺少某些模块或直接通过模块启用多播转发或加载模块的权限。鉴于您遇到权限错误和模块问题，以下是一些进一步的步骤来排查和可能启用多播支持：6.6.52-ophubsysctligmp
验证内核配置：某些 Armbian 内核，尤其是自定义内核，如 ，可能禁用了多播或其他网络功能，以节省空间或资源。您可以通过…
-
Hi vsomeip experts:
Currently I am trying to test multiple routing managers in V3.3.8 and V3.4.9-r1 (with build option ENABLE_MULTIPLE_ROUTING_MANAGERS=1) in single process for VLAN user case. Howe…
-
```
Two instances of CORE running on the same network will interfere with each
other. To generate location events, CORE uses libemaneeventservice.
The library documentation says:
* The default value…
-
**Describe the bug**
Insert type 0 routing header with the multicast FF00:: address. test is Fail on Zephyr3.0.0 on qemu_x86
**References**
RFC 2460: section 4.4
RFC 4291: section 2.7
**Results**
…
-
Though Openfabric will happily insert onlink routes on unnumbered interfaces, it seems that IS-IS "needs" to have an IPv4 address on the interface(s), else it doesn't have next hops to insert.
I've…
-
Currently if you send a broadcast to ff05::1 for example a routing node doesn't forward the packed if the router itself has the address assigned to it's receiving interface.
I'll create a pull-reques…
-
**Is your feature request related to a problem? Please describe.**
I would like to place WLED devices into our [Freifunk](https://freifunk.net/) Wireless Community Mesh Network. And let people in o…
-
See [overlay multicast and routing](https://github.com/ipop-project/ipop-project.github.io/wiki/Coding-Challenges#1-overlay-multicast-and-routing-modules) for details on design guidelines.
This issue …