-
when I write my neighbor part(in the sample.xml),I found i couldn't define upper or below neighbor rule. As an example, there is 'T',I want 'T' below neighbor a 'I'. How can i do it?
-
I'd like to start this discussion because I might research this topic when I get bored. I am not an OpenCL or CUDA expert (or even novice) so I'm putting my findings here as I go.
- https://forums.…
-
-
### Description:
I was hoping to speed up MCP by confining the paths using max_cost and max_cumulative_cost. Neither parameter displays the expected effects (output is not effected by either).
I e…
-
There are not neighbors
-
Image 1 - regular setting, NN is not turned on
Image 2- NN turned on
-
Hello,
We are using Cilium with the kube-proxy replacement feature, along with L2 neighbor discovery, as recommended in the documentation. This feature has been working well; however, we have noticed…
-
### Describe the feature
In discv4, log the peers we discovered when we receive the `Neighbours` packet via `trace!`.
Currently we just know we received the `Neighbors` response, but not what t…
-
### Description
I have an Exabgp and two FRR routers (frr1 & frr2) connected in series. If frr1 is in Sub-AS 3001 within confederation AS 30, and frr2 is in AS 3001 not within any confederation, t…
-
#### Description
We observe a switch crash during some neighbor operations - adding or removing. It sometimes gets triggered when an SFP module gets installed. Neighbor update job runs for 30 secon…