-
Hi,
First of all, thank you for all of the hard work you've put into the NMEA2000 library!
I'm having issues with your due_can fork: https://github.com/ttlappalainen/due_can/ not working on my …
-
I am trying to broadcast the following sentence in the "Enter Sentence" Widget. I stop the simulator, enter the data, click apply, and press play. The message does NOT appear in the candump of the net…
-
Hello Together,
I have a Simrad GO7 XSR Chart Plotter..... and I have two nodes created by my own on an ESP8266....
1st is sending a Heading Signal
2nd is sending Humanity and Teperaturs
Str…
-
I have a board that has two native `can` interfaces `canC` and `canE`. The board receiving navigational data from `nmea0183` over serial. This may be re-transmitted and used in widgets without problem…
-
I'm using a board with an ESP32-WROOM-32U, 16MB module. My FW is an N2K projet using this code and also the companion NMEA2000 library (although a version from last November). Upon initial power up, m…
-
Whenever I use these libraries CAN_BUS_Shield NMEA2000 NMEA2000_mcp
and any of the examples in NMEA2000 I get "failed to open CAN device".
However, if I use just the MCP2515 library I can get th…
-
After an update of openplotter 2 earlier this year my plotter (Garmin 721xs) no longer received NMEA 2000 data from my Raspberry with PICAN-M NMEA 2000 interface. Sorry, I don't have details of previo…
-
Unlike NMEA0183, which uses a simple text format, NMEA2k messages are binary and unintelligible to the eye. Further, the binary forms is proprietary and only available to licence holders. However, t…
-
Unlike NMEA0183, which uses a simple text format, NMEA2k messages are binary and unintelligible to the eye. Further, the binary forms is proprietary and only available to licence holders. However, the…
-
Hi,
I had see issue.
as it was with an install on wich I did some updates , I did a fresh install.
signalk is ok,
I just have a usb mouse GPS, data are ok
and a can hat , and I have the data …