-
**MySensors Version:** 2.2.0
**Hardware:**
* STM32 BluePill @72MHz (Serial) Gateway + any type of node
* nRF24 radios
**What I'm doing:** Bench marking different gateways (currently a STM32 Ser…
-
Hi there,
I am currently trying to get the nrf24playset up and running for a presentation.
I have a bitcraze pa with Bastille firmware and installed the nrf24-playset
When I turn on the r400 …
-
Hey. Iv got a batch of the fake epoxy/COB "worst fake" wireless modules advertised as NRF24's (blatant lie)
I can send using an Arduino Uno (using the https://github.com/maniacbug/RF24 lib only) an…
-
http://www.airspayce.com/mikem/arduino/NRF24/
-
i am trying to install the package on raspbian 11 bullseye 64bit - nodejs v14.19.1 but i have this error:
```
g++ -fPIC -marm -march=armv6zk -mtune=arm1176jzf-s -mfpu=vfp -mfloat-abi=hard -Ofast -…
-
hey @benallen-dev! I really appreciate your work for this project!
I tried to get it working with my LED bar, but unfortunately I do not have had success. What I did was connecting my nRF module to a…
-
When I try to use RC to control the drone, the core of the drone keeps restarting.
```
I (3) PWM: Initialisation finished ...
I (6) MPU6050: I2C Initialisation finished ...
I (11) MPU6050: MPU6…
-
Hey Marc,
Invoking the scanner on Raspbian ARM seems to work, but after I `Ctrl-C` out the next time I try to run the scanner I get what's seen below, a state I can only clear by either reseating the…
-
Hello, first thanks for the work done !
I liked the mqtt subscriber for home assistant but I wanted to still be able to use the physical remote without having a desynchronization between the real s…
-
I am sure after a week of trying that wires are correctly connected proper voltage (3.24V ) and capacitor 10uF is connected to nrf24. same circuit with pro mini is working as server and client.
Now I …