-
**Describe the bug**
I seem to have run into a buffer exhaustion issue within the BLE stack.
**To Reproduce**
```
west build samples/bluetooth/peripheral_hr -b nrf52dk_nrf52832
west flash
…
-
**Describe the bug**
Unable to maintain both a BIS and ACL connection at the same time.
When using a broadcast assistant, together with a broadcast source and broadcast sink, the broadcast sink wi…
-
Hi, thanks for a great library!
I observe weird timing for auto-ack transmission, is this expected? Below is measured time for `write()`
Boards are 2x XIAO ble sense, about 10cm apart
Settings: `…
-
**Describe the bug**
LL assert when controller uses aux adv chains. Happens after ~10s on real HW, not able to reproduce using BSIM.
Note that the bsim test also has a bunch of problems:
- copy-pa…
-
Compiling unmodified code and running it on RAK4631 produces the following error over the RTT interface. Patch has been applied prior to building. Please help me understand what is happening.
…
-
Writing and reading from an external flash chip can take quite a while. So this library should ideally be async.
But how to do that?
I don't want to maintain both a blocking and an async version o…
-
Please read [about common issues](https://github.com/nRF24/RF24/blob/master/COMMON_ISSUES.md) first. It addresses the most common problems that people have (whether they know it or not).
Same as be…
-
Hi,
I'm using auto-pts on windows, and when the client starts, I get following error every time and I'm unable to run any tests.
```
2023-10-05 13:09:02,528 LT1-thread root DEBUG __init__.py …
-
Hi,
Trying to compile the NeoPixelTest example for this particular board based on an ARM M4F, SAME53N19A chip and getting a bunch of missing declarations. Any hope of getting this to compile on thi…
tohox updated
3 years ago
-
**Describe the bug**
When trying to use USE_SEGGER_RTT, I get the following fault
> warning: USE_SEGGER_RTT (defined at modules\segger\Kconfig:12) was assigned the value 'y' but got
> the value…