-
Hi there,
I'm trying to run kalibrate-bladeRF on my x40, i tried to run it over GSM850 and GSM900 but still no result shown, even i tried with -m. here are some info relate with my stuff
./kal -…
-
Hello,
Thank you very much for creating kal/kalibrate for limeSDR - it is a very standard tool that should definitely exist.
Unfortunately, there are long-standing / well-known issues with kal o…
-
Hello!
I'm having issues using the BladeRF-A4 to decode ADSB messages. Everything seems okay on the command line (I get no errors), however no messages are ever decoded. I know that the antenna I…
-
According to
https://github.com/EFForg/crocodilehunter/commit/0ab5ac52635569912b8d474f9d213d7c61ab141f
We need to install FPGA on our own
-
Hello all,
I just want to cut straight to the chase. I am helping a customer of mine to get a variety of spectrum analysis software and hardware running on his computer. We've not had any issues un…
-
When trying to tune to frequencies below 300Mhz using BladeRF 1.0 with the XB-200 extension board enabled, the following error message is shown usuallly:
`[ERROR @ host/libraries/libbladeRF/src/board…
-
Apologies if this is the wrong place to ask, but is it possible (or, how hard would it likely be) to use two half-duplex SDRs (e.g. 2x HackRF One) instead of a full-duplex transceiver? My (likely naiv…
-
Hi there,
i need to implement an synthesizer, which should be controlled by the fpga. We bought the bladerf-micro thinking, that this interface would be doable at the expansion port.
Unfortunately, …
-
On a bladeRF 115K + xb 300
Command line
xb 300 pwr
doesn't work while transmitting ("device busy")
otherwise the resullting wording in NOT appropriate and really misleading...
"PA output power:…
-
I am having an issue with quick tune and it's respective functions.
I have downloaded [https://github.com/Nuand/bladeRF/blob/master/host/libraries/libbladeRF/doc/examples/quick_tune.c](quicktune.…