-
### Requirements
- [X] I have updated RPI_I2C_OLED to the latest available version
- [X] I did a search to see if there is a similar issue.
### Current Behavior
s6-rc: info: service s6rc-oneshot-ru…
-
Hi Vito,
Thanks for all your good work. I am working on using BPL on an ESP32 to control my pressure fermentation. To avoid having an analog gauge I would like to display the actual pressure in psi o…
-
Switch the commentar of the last lines of setup and loop functions are not working on the HELTEC WiFi LoRa 32 V2
Link to Pin-Out: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
…
-
hello there is no define.h file in esp compilation
and I have errors:
Arduino:1.8.12 (Mac OS X), Płytka:"Generic ESP8266 Module, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most…
-
Hello,
Is it possible to have the spi connection add on for big screen oled?
Eh2k from squares and circles did a wonderful job there. They are added on ports 26 and 27.
-
The oled_i2c example is written for a 128x32 pixel SSD1306 display. I tested the example with two SSD1306 displays with a resolution of 128x64. Both displays showed the same output when tested with th…
-
the seeedstudio XIAO expansion base is a nice carrier board that the QT Py ESP32C3 can be plugged into. it has an 0.96" OLED display.
the Seeedstudio docs don't explicitly say what part the OLED is,…
-
I found this display, https://www.aliexpress.us/item/3256806709509463.html?ug_edm_item_id=3256806709509463&pdp_npi=4%40dis%21USD%21%246.03%21%243.50%21%21%21%21%21%4021017dd017241432938424107d1f3d%211…
-
I wrote a small app in order to test the range of the TTGO ESP32/SX1278/SSD1306 boards. The transmit side is straightforward and sends packets with the string "Block" followed by a number that increme…
-
I have come upon a snag I can't seem to solve.
Recently I wanted to make a couple more copies of my Nano as a backup. (I have one backup and it works fine when( I plug it in). I uploaded the un…